5410 Display Key Features
List of all Display Key Features
AutCB - Automatic Callback (!)
Sets a callback when free on busy extensions and callback when next used on unanswered extensions.
This function does not require any data entered when programmed. This function can be programmed through the phone by the user using an Admin key.
When an extension called does not answer or is busy, pressing AutCB sets a callback on that extension. Whilst the callback is set, AutCB is shown with a symbol. Pressing AutCB again cancels the callback.
When the extension becomes free or is next used, Ring Back to and the number appears on the phone that set the callback. Pressing answers the ringback and starts a call to the callback target.
Busy - Busy
Sets the extension as being busy. This feature is not applicable when working with multiple Call Appearance lines as all the call appearance lines must be in use before this function becomes active.
This function does not require any data entered when programmed. This function cannot be programmed through the phone by the user.
The Busy key sets the extension as busy to callers. If a forward on busy number is set, it is followed (see FwBNo - Forward On Busy Number). Otherwise calls go to voicemail (if on) or receive busy tone if internal and ringing if external.
To return the extension from busy, press Busy and then Speaker.
BusyH - Busy On Held
Switch the users busy on held status on/off.
This function requires data entered when programmed. Enter either 0 for off or 1 for on.
This function cannot be programmed through the phone by the user.
Pressing BusyH switches the user's 'busy on held' state to either on or off as indicated by the data value. When on, if the users has a call on hold, new callers receive busy tone (ringing if analogue) or are diverted to voicemail if enabled, rather than ringing the user. This also overrides call waiting indication when the user has a call on hold.
CFrwd - Call Forwarding All (!)
Switch call forwarding on/off and set the forwarding number.
This function can be programmed with or without a target forwarding number. This function can be programmed through the phone by the user using an Admin key.
If programmed with a forwarding number, that number is shown next to CFrwd. Pressing CFrwd switches on forwarding to that number.
If programmed without a forwarding number, when CFrwd is pressed, the user's current forwarding number setting is shown. Change the number using the telephone keypad and <<< to backspace. When the number set as required press Done .
When call forwarding is on, CFrwd is shown with a symbol and D (Diverted) is shown at the top of the display. To switch call forwarding off, press CFrwd again.