5410 Headset Working
When a headset is to be used on your 5410, it must be plugged in to the headset socket on the base of your 5410 telephone. To activate the headset and switch off the handset, press Headset. The lamp beside the button is illuminated when headset working is activated.
To answer an incoming call:
- Press the call appearance key next to the flashing bell icon ():
To clear a headset call:
- Press Drop.
To manually make a call:
Dial the number (remember to include the required access code (for example, 9) for an outside line) and listen to the progress of the call.
To automatically make a call:
Do any of the following:
The two-way built-in speakerphone allows you to make and answer calls without lifting your handset. Keep in mind that two-way speakerphones may not operate satisfactorily in every environment (such as in very noisy locations).
To make or answer a call without lifting the handset, or to use the speakerphone with any feature
Press Speaker. The LED beside the button illuminates.
Make or answer the call, or access the selected feature.
Adjust the speakerphone volume if necessary.
To change the volume use the and buttons. The display shows the volume level. (There are eight volume levels.)
To change from the speakerphone to the handset
Pick up the handset and talk.
To change from the handset to the speakerphone
Hang up the handset.
To end a speakerphone call
Press Speaker again.