Avaya business partner Virginia

T1 Lines

Setting the Outcalling Lines to No Ring

If the communications system is operating in Key mode and Outcalling is used, the outside line(s) assigned to the MERLIN Messaging System voice port(s) that are used for Outcalling must be set to No Ring. This procedure is not necessary if the communications system is operating in the Hybrid/PBX mode.

For MERLIN Messaging System Release 2 or later, the voice port(s) used for Outcalling are Port 2 when a 2-port card is installed, Port 4 on a 4-port card, Ports 5 and 6 on a 6-port card, Ports 7 and 8 on an 8-port card, Ports 9 and 10 on a 10-port card, or Ports 11 and 12 on a 12-port card. For Release 1 or 1.1, the voice port used for Outcalling is Port 2 when a 2-port card is installed, Port 4 on a 4-port card, or Port 6 on a 6-port card.

Setting the Outcalling Lines to No Ring

 

Step
Programming Task

From programming console or
from WinSPM in Standard SPM mode, select...

     
1 Enter Programming mode. Menu
    Sys Program
    Exit/Start
     
2 Display next page menu. More
     
3 Select Centralized Telephone Programming. Cntr-Prg
     
4 Select Program Extension.

Program Ext

     
5 Enter the extension you want to program. [nnn] Enter
     
6 Start Centralized Telephone Programming.

Start

     
7 Select the line button representing the Outcalling line.

Press button on console

     
8 Select Ring Options for all lines. * 3 4 5 or
ListFeature
Ring Options
All Lines
Enter
No Ring
Enter
     
9 Return to System Programming Menu Sys Program -Exit/Back-
Exit/Back

 

Merlin Messaging Main

Setting the Outcalling Lines to No Ring

IP Office| Avaya Partner Phone Systems |

Avaya Phone Systems

 

1-800-429-0077 ::: Fax 1-732-751-8811
5133 West Hurley Pond Rd., Farmingdale, NJ 07727
Contact us
Copyright 2006 CarrollCommunications.com, All Rights Reserved.