Maintenance Error Codes Merlin Magix

Maintenance Error Codes- Merlin Magix

Error Code

Description

Action

7402

Loop Control Bit Not Set:
No loop current on outgoing call. If error occurs four times consecutively, and if automatic maintenance-busy is enabled with less than 50% maintenance busy, trunk is busied out automatically.

Test trunk with single-line telephone. If problem is not in the trunk, replace module with one known to work. If problem is not seen with known working module, replace the module and restart.

7403

No Loop Current:

Communication problems between module and CO. No loop current. If error occurs four times consecutively, and if automatic maintenance-busy is enabled with less than 50% maintenance busy, trunk is busied out automatically.

Test trunk with single-line telephone. If problem is not in the trunk, replace module with one known to work. If problem is not seen with known working module, replace the module and restart.

7404

Stuck Ringing :
Communication problems between module and CO. If error occurs two times consecutively, trunk is busied out automatically whether or not automatic maintenance-busy is enabled.

Test trunk with single-line telephone. If problem is not in the trunk, replace module with one known to work. If problem is not seen with known working module, replace the module and restart.

7801

Not In Normal Op Mode :
Module not in normal operation mode; reported in background module check.

Reset board. If problem persists, check module.
Maintenance-Slot-Slot Number- Reset

7802

Sanity Int Not Generated:
Applies only to modules with extension jacks.

Reset board. If problem persists, check module.

Merlin Magix - Maintenance Error Codes

Avaya IP Office Telephone Systems | Avaya Merlin Magix|

Avaya Telephone Systems

Telecommunications Consulting New Jersey