Maintenance Error Codes Merlin Magix

Maintenance Error Codes- Merlin Magix

Error Code

Description

Action

000A

Power UP Cold Start:
RAM failure in processor;System Programming OK.

If problem persists, trouble shoot the processor.

000B

Card Inserted/ Removed

None

000C

Slot Stream CNT Exceeded:
Slot generated excessive interrupts.

If problem persists,check module.

000D

FMWR Not in Standby Mode:
Module firmware not in standby mode..

If problem persists,check module.

000E

Command Buffer Full:

If problem persists, check processor and module.

000F

Task Running Too Long:

None, if problem persists, check processor.

0010

Invalid Slot Interrupt:
Cannot determine module responsible for interrupt.

Check modules and replace if neccesary; if problem persists, check processor.

0011

Stack Overflow :
Processor Problem

Check processor.

0012

Invalid Reset Flag:
Processor Problem

Check processor.

0013

Duart Streaming Int:
Processor Problem

Check processor.

0014

Processor Err Interrupt :
Processor Problem

Check processor.

0015

Module Mismatch :
Module inserted into wrong slot

Change system programming for proper module or install proper module.

Merlin Magix - Maintenance Error Codes