Maintenance Error Codes Merlin Magix

Maintenance Error Codes- Merlin Magix

Error Code

Description

Action

6C0A

DS1 Slip Alarm:
Slip count reached 88.

Usually no action. Check T1 facility. If problem persists, contact NSAC Tier III. Maintenance-Slot-Error Events-Current hr

6C0B

Hardware Inoperative :
Hardware not operating properly. If this is the only 100D module or 800 NI-BRI module, or if this is the designated clock module, its TDM bus clock generator was not activated.

A busy-out/ restore or reset/restore may clear problem. If problem persists, contact NSAC Tier III.

6C0C

Bri Loss of Sync :
Service on link has been lost..

Usually none; Check BRI facility. If problem persists, contact NSAC Tier III.

6C0D

Bri Slips > 88 :
Slip count > 88. Service on link is still operable.

Usually none; Check BRI facility. If problem persists, contact NSAC Tier III.

6C0E

Bri Net Requested CCRC :
Outgoing signal to the network does not have valid framing information. Service on link is still operative.

Usually none; link should return to normal once test is completed. If problem persists, contact NSAC Tier III.

6C0F

Bri Net Deactivate
Layer 1 of the link is down. Service on the link has been lost

Usually none; link should return to normal once test is completed. If problem persists, contact NSAC Tier III.

6C10

Bri Net Inv 2B+D LB ACT
Service on the link has been lost

Usually none; link should return to normal once test is completed. If problem persists, contact NSAC Tier III.

Merlin Magix - Maintenance Error Codes

IP Office | Avaya Merlin Magix|

Avaya Telephone Systems

Telecommunications Consulting New Jersey