Security settings can only be loaded directly from an IP Office system. These settings are not savable as a file on the local PC.
Loading and IP Office's Security Settings
The address ranges in which Manager searches for IP Office systems are set through the Manager preferences (File | Preferences | Edit).
If not already done, switch Manager to security mode by selecting File | Advanced | Security Settings.
Note: If the IP Office system's configuration settings have already been loaded using a Service User name and Password that also has security access, then the security settings are automatically loaded when Manager is switched to security mode.
Click in the main toolbar or select File | Open Security Settings from the menu bar.
The Select IP Office window appears, listing those IP Office systems that responded. The list can be sorted by clicking on the column names.
If the system required was not found, the address used for the search can be changed. Enter or select the required address in the Unit/Broadcast Address field and then click Refresh to perform a new search.
When the system required is located, check the box next to the system and click OK.
The user name and password request for the system is then displayed. Enter the required details and click OK. By default this is a different user name and password from those that can be used for configuration access.
If the security settings are received successfully, they appear within Manager.
Saving Security Settings
Click in the Main Toolbar or select File | Save Configuration Settings from the menu bar.
The user name and password request for the system is then displayed. Enter the required details and click OK. By default this is a different user name and password from those that can be used for configuration access.
in the main toolbar or select 
in the Main Toolbar or select