File | Open Configuration
This command displays the Select IP Office menu used to receive an IP Office systems configuration settings. See Loading a Configuration.
The same action is performed by the  icon in the Main Toolbar.
The Select IP Office menu is also used for other actions such as reboot and sending a configuration. If the unit required is not found, the Unit/Broadcast Address can be changed and then Refresh clicked. To change the TCP addresses scanned, select File | Preferences | Discovery and enter the required addresses in the IP Search Criteria.
File | Close Configuration
This command closes the currently loaded configuration without saving it.
.
File | Save Configuration
The File | Save command saves the amended configuration.
If the configuration has been received from an IP Office, the Send Config menu is displayed. See Sending a Configuration.
If the configuration file has been opened offline or created from new, the file is saved to disk only.
File | Save Configuration As
The File | Save As command allows you to save a configuration offline. The command displays the Save File As dialog box. You can enter the new file name, including the drive and directory.
File | Change Working Directory
This command allows you to change the default locations where Manager looks for and saves offline configuration (.cfg) files and IP Office equipment binary (.bin) files.
-
Working Directory (.cfg files)
Sets the directory into which Manager saves .cfg files. By default this is the Manager application's program directory.
-
Binary Directory (.bin files)
Sets the directory in which the Manager upgrade, TFTP and BOOTP functions look for .bin files. By default this is the Manager application's program directory.
1-800-429-0077
|
