Shared Secret/Confirm Password
The password used for authentication. This must be matched at both ends of the tunnel.
Exchange Type: Default = ID Prot
Aggressive provides faster security setup but does not hide the ID's of the communicating devices. ID Prot is slower but hides the ID's of the communicating devices.
Encryption: Default = DES CBC
Select the encryption method used by the tunnel. The options are: DES CBC, 3DES or Any.
Authentication: Default = MD5
The method of password authentication. Options are: MD5, SHA or Any.
DH Group: Default = Group 1
Life Type: Default = KBytes
Sets whether Life (below) is measured in seconds or kilobytes.