The IP address to match for ongoing routing. Any packets meeting the IP Address and IP Mask settings are routed to the entry configured in the Destination field. When left blank then an IP Address of 255.255.255.255 (all) is used.
The Subnet Mask used to mask the IP Address for ongoing route matching. If blank the mask used is 255.255.255.255 (all).
Gateway IP Address: Default = Blank
The address of the gateway where packets for the above address are to be sent. If this field is set to 0.0.0.0 or is left blank then all packets are just sent down to the Destination specified, not to a specific IP Address. This is normally only used to forward packets onto another Router on the local LAN.
Allows selection of LAN1, LAN2 (Small Office Edition and IP 412) and any configured Service, Logical LAN or Tunnel.
Metric: Default = 1
The number of "hops" this route counts as.
Proxy ARP: Default = Off
This allows the IP Office to respond on behalf of this IP address when receiving an ARP request.