The name of the service. It is recommended that only alphanumeric characters be used.
The User Name that is used to authenticate the connection. This is provided by the ISP or remote system.
Password: Default = Blank
Enter the password that is used to authenticate the connection. This is provided by the ISP or remote system.
Telephone Number: Default = Blank
If the connection is to be made via ISDN enter the telephone number to be dialed. This is provided by the ISP or remote system.
Firewall Profile: Default = None
From the list box select the Firewall Profile that is used to allow/disallow protocols through this Service.
Encrypted Password: Default = Off
When enabled the password is authenticated via CHAP (this must also be supported at the remote end). If disabled, PAP is used as the authentication method.
Default Route: Default = Off
When enabled this Service is the default route for data packets unless a blank IP Route has been defined in the IP Office IP Routes. A green arrow appears to the left of the Service in the Configuration Tree. Only one Service can be the default route. If disabled, a route must be created under IP Route.