The Avaya IP Office platform is the ultimate in converged voice and data technology. IP Office brings a combination of voice and data applications formerly reserved for only the largest corporations. Cutting edge customer service with easy to use tools is now available to the smallest of businesses.
Tunnel | Main (IPSec)
Settings
Action
Operator Rights View
Mergeable
System
Level
Administrator
Manager
Operator
SOE
2.1
View
Pre-3.2
3.2
IP403
3.0DT
Edit
IP406 V1
3.0
New
IP406 V2
3.1
Delete
IP412
3.2
Name:Default = Blank.
A unique name for the tunnel. Once the tunnel is created, the name can be selected as a destination for traffic in the IP Route table.
Local Configuration
The IP Address and IP Mask are used in conjunction with each other to configure and set the conditions for this Security Association (SA) with regard to inbound and outbound IP packets.
IP Address
The IP address or sub-net for the start of the tunnel.
IP Mask
The IP mask for the above address.
Tunnel Endpoint IP Address
The local IP address to be used to establish the SA to the remote peer. If left un-configured, IP Office will use the IP address of the local interface on which the tunnel is to be configured.
Remote Configuration
The IP Address and IP Mask are used in conjunction with each other to configure and set the conditions for this Security Association (SA) with regard to inbound and outbound IP packets.
IP Address
The IP address or sub-net for the end of the tunnel.
IP Mask
The IP mask for the above address.
Tunnel Endpoint IP Address
The IP address of the peer to which a SA must be established before the specified local and remote addresses can be forwarded.
