The Avaya IP Office platform is the ultimate in converged voice and data technology. IP Office brings a combination of voice and data applications formerly reserved for only the largest corporations. Cutting edge customer service with easy to use tools is now available to the smallest of businesses.
Tunnel | Tunnel (L2TP)
Settings
Action
Operator Rights View
Mergeable
System
Level
Administrator
Manager
Operator
SOE
2.1
View
Pre-3.2
3.2
IP403
3.0DT
Edit
IP406 V1
3.0
New
IP406 V2
3.1
Delete
IP412
3.2
Name:Default = Blank.
A unique name for the tunnel. Once the tunnel is created, the name can be selected as a destination in the IP Route table.
Local Configuration
The account name and password is used to set the PPP authentication parameters.
Local Account Name
The local user name used in outgoing authentication.
Local Account Password/Confirm Password
The local user password. Used during authentication.
Local IP Address
The source IP address to use when originating an L2TP tunnel. By default (un-configured), IP Office uses the IP address of the interface on which the tunnel is to be established as the source address of tunnel.
Remote Configuration
The account name and password is used to set the PPP authentication parameters.
Remote Account Name
The remote user name that is expected for the authentication of the peer.
Remote Account Password/Confirm Password
The password for the remote user. Used during authentication.
Remote IP Address
The IP address of the remote L2TP peer or the local VPN line IP address or the WAN IP address.
Minimum Call Time (Mins):Default = 60 minutes, Range = 1 to 999.
The minimum time that the tunnel will remain active.
Forward Multicast Messages:Default = On
Allow the tunnel to carry multicast messages when enabled.
Encrypted Password:Default = Off
When enabled, the CHAP protocol is used to authenticate the incoming peer.
