Automatic Daylight/Standard Times (#126)
This feature automatically updates the system clock for annual Daylight Savings Time and Standard Time changes. Turn this feature off if you live in an area without daylight savings time.
This feature needs to be deactivated due to the Energy Policy Act of 2005 which changed the dates for Daylight Savings Time.
To change the status of Automatic Daylight/Standard Time:
Press feature +(00)+(system program)+(system program)+#126 at extension 10 or 11.
Press (Next Data) until the appropriate value appears:
1 = Active (the factory setting)
2 = Not Active
Select another procedure, or exit programming mode.
Changing Clock for Automatic Daylight/Standard Times (#126)
Note:
On August 8, 2005, President George W. Bush signed the Energy Policy Act of 2005. This Act
changed the time change dates for Daylight Saving Time in the U.S. Beginning in 2007, DST will
begin on the second Sunday in March and end the first Sunday in November.
How do I deactivate the Automatic Daylight Savings Time feature?
1. Log in to the PARTNER ACS system in the System Administration mode
a. From extension 10 or 11, press [ FEATURE ] [ 0 ] [ 0 ]
b. Press the LEFT intercom button twice
2. Dial [ # ] [ 1 ] [ 2 ] [ 6 ]
3. The default setting is 1 (active). To deactivate, dial 2
4. Exit from System Administration [ FEATURE ] [ 0 ] [ 0 ]
|
