VoIP PBX Carroll Communications is an authorized Avaya business partner
  Partner Phone System
  Carroll Communications Home
  Avaya Partner Phone System
  Partner ACS Features
  Partner Telephones
  Expansion Modules
  20 Reasons to Buy
  Partner Feature Codes/Programming
   
  Voice Mail Solutions
  Avaya Partner Messaging
  Message PC Cards
  Partner Messaging Features
  Program Partner Messaging
   
  Troubleshooting the Partner Phone System
  Troubleshooting Partner Messaging
  Sistema telefónico
  Telephone System QUOTE

Avaya PBX Business Phone System

 
Panasonic Headset
 
Tek Tips
Tek Tips 100-200
 
IP Office telephone systems
about us | phone equipment | telecommunications consulting | avaya ip office | site map | contact us

Partner ACS Telephone System

Assigning Lines- Number of Lines (#104)

 

Use the feature Number of Lines (#104) to determine in Key mode the number of outside lines that are automatically assigned to all system extensions, or to determine in Hybrid mode the number of lines assigned to the main pool. After you use the Number of Lines feature, you can use other features to refine the assignment of lines.

Line assignment is also based upon whether an extension is a Key or Pooled extension. Refine the line assignment accordingly after you use the Number of Lines feature.

Use this feature to determine in Key mode the number of outside lines that are automatically assigned to all system extensions. In Hybrid mode, use this feature to determine the number of lines assigned to the main pool. (This number does not have to match the actual number of lines connected at the control unit.) This feature should be used only for initial system setup.

CAUTION:
Do not use Number of Lines (#104) after initial setup.

  • You can use this feature to tell the system how many lines are actually connected at thecontrol unit. If you do not use this feature, the line numbers associated with empty jacks are assigned to telephones as though there were actually lines connected.
  • You can use this procedure to limit the number of lines that are automatically assigned to all extensions. For example, if there are ten lines connected to the control unit, you can use this procedure to set the number of lines to eight, so that only the first eight lines are assigned to all system extensions. You can then use Line Assignment (#301) to assign lines 9 and 10 to specific extensions.
  • To change pool assignments without affecting other settings, use Pool Line Assignment (#207) and Pool Extension Assignment (#314).
  • In Hybrid mode, do not use this feature to add lines to the system after initial setup, because it changes the following features for existing pools back to factory settings:
    Pool Line Assignment
    Pool Extension Assignment
    Pool Access Restriction
    Automatic Line Selection
    Line Ringing
  • In Hybrid and Key mode, do not use this feature to add lines to the system after initial setup, because it changes the following features for individual lines back to factory settings:
    Line Assignment
    Line Access Restriction
    Automatic Line Selection
    Line Ringing
  • To change line assignments without affecting other settings, use Line Assignment (#301).
  • If your system has a 1600 DSL module, the module is automatically assigned 16 lines. If you have less than 16 lines actually equipped for service, you may remove the unequipped line appearances from the extension telephones by using Line Assignment (#301).


 

 

 

t1 lines | avaya business partner maryland | avaya one x quick edition | boston phone system | merlin magix | contact us
PO BOX 186 Spring Lake, New Jersey 07762
1-800-429-0077 ::: 732-280-3200
Copyright 2008 CarrollCommunications.com All Rights Reserved.