VoIP PBX Carroll Communications is an authorized Avaya business partner
  Partner Phone System
  Carroll Communications Home
  Avaya Partner Phone System
  Partner ACS Features
  Partner Telephones
  Expansion Modules
  20 Reasons to Buy
  Partner Feature Codes/Programming
   
  Voice Mail Solutions
  Avaya Partner Messaging
  Message PC Cards
  Partner Messaging Features
  Program Partner Messaging
   
  Troubleshooting the Partner Phone System
  Troubleshooting Partner Messaging
  Sistema telefónico
  Telephone System QUOTE

Avaya Business VoIP PBX

 
Panasonic Headset
 
Tek Tips
Tek Tips 100-200
 
IP Office telephone systems
about us | phone equipment | telecommunications consulting | avaya ip office | site map | contact us

Partner ACS Telephone System

Recall Timer Duration (#107)

 

Use this feature to change the length of the timed signal, or switchhook flash, generated by the system Recall feature (as well as by the Recall option used in Auto Dial and Speed Dial numbers). Recall sends this timed signal over the telephone line to the local telephone company or PBX to which the system is connected. Typically, you use the Recall feature to access a PBX, central office, or Centrex feature, such as Call Waiting. Your local telephone company can tell you the correct setting–for most Centrex systems, the correct setting is 800 msec. (or 32).

You should change the factory setting only under two conditions:

  1. If using the system Recall feature has no effect, lengthen the time.
  2. If the system is connected to a PBX or Centrex system and Recall drops calls, shorten the time.

To change the duration of the Recall Timer signal:

  1. Press feature +(00)+(system program)+(system program)+#107 at extension 10 or11.                                               A display similar to the following appears:
    Recall Timer Duration
    18 450-msec
  2. Enter a different Recall Timer setting by pressing (Next Data) or (Prev. Data).                                                              For example, to increase the Recall Timer setting to 750 msec., press (prev. Data) until a display similar to the following appears:
    Recall Timer Duration
    30 750-msec
    You also can enter the setting number directly. For example, to set the Recall Timer to 750 msec., press 30.
    Recall Timer settings run from 01 to 80 (25 to 2000 msec. in 25 msec. increments); 18 (450 msec.) is the factory setting.
  3. Select another procedure, or exit programming mode.


 

t1 lines | avaya business partner miami | avaya one x quick edition | new york phone system | merlin magix | contact us
PO BOX 186 Spring Lake, New Jersey 07762
1-800-429-0077 ::: 732-280-3200
Copyright 2008 CarrollCommunications.com All Rights Reserved.