VoIP PBX Carroll Communications is an authorized Avaya business partner
  Partner Phone System
  Carroll Communications Home
  Avaya Partner Phone System
  Partner ACS Features
  Partner phones
  Expansion Modules
  20 Reasons to Buy
  Partner Feature Codes/Programming
  Voice Mail Solutions
  Avaya Partner Messaging
  Message PC Cards
  Partner Messaging Features
  Program Partner Messaging
  Troubleshooting the Partner Phone System
  Troubleshooting Partner Messaging
  Sistema telefónico
  Telephone System QUOTE

avaya business telephone system

Panasonic Headset
Tek Tips
Tek Tips 100-200
IP Office telephone systems
about us | phone equipment | telecommunications consulting | avaya ip office | site map | contact us

Partner ACS Telephone System

SMDR Output Format (#610)


Use this feature to specify whether a maximum of 15 digits or 24 digits is printed for dialed numbers in the Number field on the call report. The longer field is useful for businesses, such as law offices and hotels, that need to record many digits for outgoing calls for billing purposes.

Before changing to 24 digits, check the documentation for your call accounting device to verify that 24 digit output is supported.

  • If the output format is set to 15 digits and a g?h prints as the last digit of a dialed number on a call report (indicating that the digits dialed exceed the 15 digits the Number field can hold), you may want to change the output format to 24 digits.
  • If the output format is set to 24 digits and SMDR Talk Time (#611) is set to Active, the combined length of the fields for a call record is greater than the 80 characters supported by most printers. If call records wrap around to the next line, reduce the font size or increase the characters-per-inch setting for the printer. If necessary, change the output format back to 15 digits.
  • When you change the output format, the length of the Number field is adjusted for the next call record that prints. To print a new header, use SMDR Top of Page (#609).

To change the maximum number of digits for dialed numbers that can print on call reports:

  1. Press feature +(00)+(system program)+(system program)+#610 at extension 10 or 11.
  2. Press (Next Data) until the appropriate value appears:
    1 = 15 Digits (the factory setting)
    2 = 24 Digits
  3. Select another procedure, or exit programming mode.




t1 lines | avaya business partner miami | avaya one x quick edition | new york city phone system | merlin magix | contact us
PO BOX 186 Spring Lake, New Jersey 07762
1-800-429-0077 ::: 732-280-3200
Copyright 2008 CarrollCommunications.com All Rights Reserved.