Toll Call Prefix (#402)
Use this feature to indicate whether users must dial a 0 or 1 before the area code to make a long distance call, or just the area code and number (this feature is not available for the Hong Kong Release 3.0 version). Set Toll Call Prefix to reflect the dialing patterns of your local telephone company.
- This feature affects the operation of dialing restrictions and permissions.
To change the Toll Call Prefix setting:
- Press feature +(00)+(system program)+(system program)+#402 at extension 10 or 11.
- Press (Next Data) until the appropriate value appears:
1 = 0 or 1 required before Area Code and Number (the factory setting) ?
2 = Area Code and Number Only
- Select another procedure, or exit programming mode.
|
