VMS Hunt Schedule (#507)
Use this feature to determine whether the outside lines assigned to Hunt Group 7 hunt through the VMS Hunt Group all the time, only during Day operation (Night Service is off), or only during Night operation (Night Service is on). This feature affects only the Automated Attendant service of the voice messaging system. You can program VMS Hunt Schedule on a per-line basis.
You must use Hunt Group Extensions (#505) to assign the extensions associated with the voice messaging system hardware to Hunt Group 7.
If you set the VMS Hunt Schedule for Day Only or Night Only, you must use Night Service Button (#503) to program a Night Service Button for extension 10.
When the VMS Hunt Schedule is set to Day Only and Night Service is turned off (in Day mode), calls coming in on lines assigned to the hunt group are sent to the hunt group. If Night Service is turned on (in Night mode), incoming calls do not go to the hunt group.
When the VMS Hunt Schedule is set to Night Only and Night Service is turned off (in Day mode), calls coming in on lines assigned to the hunt group are not sent to the hunt group. If Night Service is turned on (in Night mode), incoming calls go to the hunt group.
To change the VMS Hunt Schedule setting for the voice messaging systemís Automated Attendant Service:
- Press feature +(00)+(system program)+(system program)+#507 at extension 10 or 11.
- Enter the line number.
The current setting is displayed.
- Press D until the appropriate value appears:
1 = Always (the factory setting)
2 = Day Only
3 = Night Only
- To set VMS Hunt Schedule for another line, press n or p until the line number appears on the display. Then repeat Step 3.
- Select another procedure, or exit programming mode.