Plantronics Wireless Headsets

Office Phone Systems





















Automatic System Answer Delay (#110)

Use this feature to specify the number of times (0–9) an incoming call should ring before it is
answered by Automatic System Answer.

  • Automatic System Answer Delay works independently of Line Ringing, which determines how an outside call rings at an extension—immediately, after a 20 second delay, or not at all. Automatic System Answer Delay specifies the number of rings a caller hears before the system answers the call.
  • If you use Caller ID, make sure Automatic System Answer Delay is set to 2 rings or more to ensure that Caller ID information is captured.
  • If you use T1 lines with Direct Inward Dialing (DID) that are not administered for Direct
    Inward Dialing (DID) in PARTNER ACS R7.0 PC Administration, set the number of rings to 1 ring or more.

Office Phone Systems
Office Voice Mail Systems

To change the number of times an incoming call rings at extension 10 before the system answers it:

  1. Press feature +(00)+(system program)+(system program)+#110
  2. To change the number of rings, press (Next Data) until the appropriate value appears. The number of rings can be from 0 to 9, with 0 meaning immediate answering of the call. The factory setting is 2 rings.
  3. Select another procedure, or exit programming mode.

Automatic System Answer Delay (#110)

Partner Phone System |VoIP Implementation

 

 

 

1-800-429-0077 ::: Fax 1-732-751-8811
5133 West Hurley Pond Rd., Farmingdale, NJ 07727
info@carrollcommunications.com
Copyright 2008 CarrollCommunications.com, All Rights Reserved.