Plantronics Wireless Headsets

Office Telephone Systems

Direct Extension Dial Delay (#112)

Use this feature to specify the number of times (0–9) an incoming call should ring before it is answered by the Direct Extension Dial feature.

  • This feature works independently of Line Ringing, which determines how an outside call rings at the extension—immediately, after a 20 second delay, or not at all. Direct Extension Dial Delay specifies the number of rings a caller hears before the system answers the call.
  • If you use Caller ID, make sure Direct Extension Dial Delay is set to 2 rings or more to
    ensure that Caller ID information is captured.
  • If you use T1 lines with Direct Inward Dialing (DID) that are not administered for Direct
    Inward Dialing (DID) in PARTNER ACS R7.0 PC Administration, set the number of rings to 1 ring or more.

To change the number of times an incoming call rings at extension 10 before the system answers it:

  1. Press feature +(00)+(system program)+(system program)+#112 at extension 10 or 11.
  2. To change the number of rings, press (Next Data) until the appropriate value appears. Values range from 0 to 9, where 0 means the call is answered immediately. The factory setting is 2.
  3. Select another procedure, or exit programming mode.


Direct Extension Dial Delay (#112)

Partner Phone System |T1 Line ISDN




1-800-429-0077 ::: Fax 1-732-751-8811
5133 West Hurley Pond Rd., Farmingdale, NJ 07727
Copyright 2008, All Rights Reserved.