Plantronics Wireless Headsets

Avaya PBX Phone Systems





















Hold Reminder Tone (#127)

Use this feature to set the time interval at which the PARNTER system will provide a reminder tone for a call on hold at a system telephone. When you place a call on hold, the PARTNER system will provide the Hold Reminder Tone at your extension if the call remains on hold for the time interval specified. You can disable the Hold Reminder Tone. (If you disable the Hold Reminder Tone, the PARTNER system will not provide a reminder tone when a call is on hold.)

  • When you program this feature via Set administration, the setting you specify will apply to all analog lines. It will not apply to T1 lines. You must use the PARTNER ACS R7.0 PC Administration software to program the Hold Reminder Tone for T1 lines.

To change the hold reminder tone time:

  1. Press feature +(00)+(system program)+(system program)+#127 at extension 10 or 11. A display similar to the following appears, showing the current Hold Reminder Tone setting:
    Hold Timer
    5 60 seconds
  2. Press (Next Data) until the appropriate value appears:
    0 = Not Active
    1 = 10 seconds
    2 = 20 seconds
    3 = 30 seconds
    4 = 45 seconds
    5 = 60 seconds (the factory setting)
    6 = 90 seconds
    7 = 120 seconds
    8 = 150 seconds
    9 = 180 seconds
  3. Select another procedure, or exit programming mode.

Hold Reminder Tone (#127)

Avaya Partner ACS Telephone System |

VoIP Implementation

 

 

 

1-800-429-0077 ::: Fax 1-732-751-8811
5133 West Hurley Pond Rd., Farmingdale, NJ 07727
info@carrollcommunications.com
Copyright 2008 CarrollCommunications.com, All Rights Reserved.