Plantronics Wireless Headsets

Avaya Phone Systems





















SMDR Record Type (#608)

Use this feature to specify whether all calls or outgoing calls only are to be included on call reports.

  • The date and time that appear on call reports are determined by System Date (#101) and System Time (#103).
  • The call report page header prints in the Display Language (#303) specified for extension 10.
  • If Account Code Entry (optional or forced) is used to enter an account code for a call, the account code prints on the call report. If there are entries in the Forced Account Code List (#409), only valid account codes and any other entered digits up to 16 print on the call report.
  • Marked System Speed Dial numbers appear on the call report as F nnn, where nnn is the Speed Dial code.
  • If you use Caller ID, SMDR reports include the telephone numbers of incoming calls.
  • Call records for incoming calls on T1 lines with Direct Inward Dialing (DID) are reported only if SMDR Record Type (#608) is set to 1=All Calls.

To identify the type of calls to include for call reporting:

  1. Press feature +(00)+(system program)+(system program)+#608 at extension 10 or 11.
  2. Press (Next Data) until the appropriate value appears:
    ■ 1 = All Calls (outgoing and incoming; the factory setting)
    ■ 2 = Outgoing Only
  3. Select another procedure, or exit programming mode.

SMDR Record Type (#608)

Partner Phone System |T1 Line ISDN

 

 

 

1-800-429-0077 ::: Fax 1-732-751-8811
5133 West Hurley Pond Rd., Farmingdale, NJ 07727
info@carrollcommunications.com
Copyright 2008 CarrollCommunications.com, All Rights Reserved.