Set Inside Call Seq

This feature allows the user to select the ringing used on their extension for internal calls. The number entered corresponds to the ring pattern required. This is 0 for Default Ring, 1 for RingNormal, 2 for RingType1, etc. For more information on selectable ringing patterns, see Ring Tones.

Use of this short code function is applicable to analog phone users only. The distinctive ring used by DS port phones is fixed by the phone type.

• See also: Set Ringback Seq, Set Inside Call Seq.

Example
This Short Code allows a user to change their inside call pattern. N represents the number corresponding to the Call Sequence the user wishes to choose, the numbering starts at 0 selecting Default Ring, 1 selects Ring Normal, 2 selects RingType1, etc. For example, if a user wants to set her/his internal ring pattern to RingType1, the user would dial *80*2# because 2 corresponds to RingType1. This short code is useful for distinguishing an external call from an internal one simply by the ring tone.

• Short Code: *80*N#

• Telephone Number: N

• Feature: SetInsideCallSeq

Set No Answer Time

This short code feature allows the user to change their No Answer Time. The default setting for each user is to use the system's No Answer Time set on the System | Telephony tab, however this can be overridden by a No Answer time set on the User | Telephony tab.  

• See also: Set Wrap Up Time

Example
This short code allows a user to change the length of time they have to answer the phone before it goes to divert or voicemail.  N represents the number of seconds. For example, if a user wants to set the allocated answer interval to 15 seconds, the following information needs to be entered: *81*15#.

• Short Code: *81*N#

• Telephone Number: N

• Feature: SetNoAnswerTime